We had a musty smell in the basement for months before we finally called. The crew found a cracked spot in the foundation wall we never would have noticed and walked us through everything before starting. No pressure, just a clear plan.
Tyler, Texas
Mold Remediation in Tyler, TX
Our IICRC-certified crew handles mold remediation for Tyler homes and businesses. Same-day response, we bill your insurance, and free estimates.
IICRC certifiedSame-day responseWe bill insuranceFree estimates
Reviews
Rated 4.9 by Tyler-area neighbors
Our insurance claim went smoothly because their photos and paperwork were thorough. Honest people who did what they said they would do.
After a pipe leak we had mold in the crawl space. They sealed the area, removed the mold, and left everything spotless.
Our process
Our mold remediation process in Tyler, TX
Inspect
We check every affected room, take moisture readings, and trace the mold back to its source before writing a scope of work.
Contain
Plastic sheeting and negative air pressure keep spores out of the clean parts of your home while we work.
Remove
Contaminated drywall, insulation, and other porous materials are removed and bagged; hard surfaces are HEPA-vacuumed and treated.
Dry
Industrial air movers and dehumidifiers bring the space back to a safe moisture level so mold loses its foothold for good.
Verify
A final walkthrough and moisture check confirm the area is dry and ready for repairs before we call the job done.
Certified & trusted
Standards we work to, carriers we bill
Where we work in Tyler
Tyler neighborhoods we cover
Wherever you are in Tyler, our certified crew can inspect, contain, and remove mold, then dry the structure so it does not return.
BostickPine SpringsElbertaBascomNew Chapel HillWhitehouseNoondayChandler
What it costs
Mold Remediation cost in Tyler, TX
Every job is different, so here are the typical Texas ranges we see. These are planning numbers, not a quote.
Small area
$500 to $1,500
A single moldy spot, a closet, or under a sink. We contain it, remove it, and treat the surface.
One room
$1,500 to $3,500
A bathroom, kitchen, or bedroom with mold on a wall or ceiling, plus the moisture source fixed.
Basement, attic, or crawl space
$2,000 to $6,000
Larger areas that need more containment and drying. Common here after spring rain or a slow leak.
Whole-house or severe
$10,000 and up
Mold across several rooms or after major water damage. We work in phases, room by room.
We give free estimates, so the surest way to know your number is to call. Want a ballpark first? Try our instant mold remediation cost calculator. Filing a claim? We bill your carrier directly, so see our mold insurance claims guide.
Local knowledge
Mold Remediation for Tyler, TX homes
Mold Remediation in Tyler tends to start the same way mold does across Smith County: air conditioning condensation feeding mold on cool basement and closet walls. When that moisture sits for even a day or two, mold takes hold, and that is when homeowners from Bostick, Pine Springs, Elberta and the rest of Tyler call us.
We handle mold remediation for Tyler the right way. We find and fix the moisture source first, because mold always returns if the water problem is left behind, then we contain the area and remove the mold safely.
Our team is based in Bullard, about 25 minutes from our Bullard base, so we can usually reach a Tyler home the same day. Our methods follow public guidance from the EPA and the CDC on handling indoor mold safely.
Tyler specifics
Mold Remediation in Tyler: what actually causes it
By the time a family calls us for Mold Remediation, they have usually already seen a musty smell or a spreading stain. We keep Mold Remediation contained and tidy, so the rest of the home near Pine Springs stays livable while we work. The reason Mold Remediation comes up so often here is simple: crawl spaces and sump pumps around Tyler, working on local homes month after month. Around here, mold remediation tends to settle into basements, bathrooms, and behind walls before anyone in the house notices it.
What sets Mold Remediation apart is where it hides: basements, bathrooms, and behind walls, exactly where homeowners rarely look. When people here search for Mold Remediation, the growth they can see is usually the last symptom, not the cause. A Tyler home that needs Mold Remediation almost always has a moisture story behind it, and it usually starts with crawl spaces and sump pumps around Tyler. Most Mold Remediation jobs in the area trace back to air conditioning condensation feeding mold on cool basement and closet walls, a pattern we see week after week.
Here is how Mold Remediation usually goes:
- Inspect the affected area and find the moisture feeding the mold
- Stop the water source so the problem does not come back
- Remove moldy material to the IICRC S520 standard
- HEPA vacuum, clean, and treat the surrounding surfaces
- Contain the space under negative air with HEPA filtration
Because our crew works about 25 minutes from our Bullard base, you usually get a same-day look for mold remediation.
Good to know
Mold Remediation in Tyler, TX: common questions
How long does mold remediation take?
Most residential jobs run a few days to about a week, depending on how much material needs removal and how long the space takes to dry. We give you a specific timeline after the inspection.
Does insurance cover mold remediation?
Coverage depends on the cause. Mold from a sudden pipe burst is often covered, while long-term humidity issues sometimes aren't. We bill your insurance directly on approved claims and can help you read your policy's language.
Do you test for mold before starting?
We inspect visually and check moisture levels on every job. If you want lab confirmation of species or air quality, we can coordinate third-party testing before or after the work.
Is the mold remediation you do in Tyler to a real standard?
Yes. Our crew follows the IICRC S520 standard for mold remediation, the same framework insurers and inspectors recognize across Smith County.
Will I need to leave my house during remediation?
It depends on the size and location of the affected area. We contain the work zone with plastic barriers and negative air pressure, so many homeowners stay in the unaffected parts of the house.
Can I just clean the mold myself?
Small surface mold on a non-porous surface like tile can often be handled with basic cleaning. Once mold has spread into drywall, insulation, or framing, or covers more than a few square feet, professional removal is the safer route.
How do you keep the mold from coming back after mold remediation?
We fix the moisture source first, not just the mold, then dry the structure and recheck it. That is what keeps mold from returning to a Tyler home.
Do you serve Tyler?
Yes. We cover all of Tyler, including Bostick, Pine Springs, Elberta, and the rest of the Tyler area. We are based in Bullard, about 25 minutes from our Bullard base, and answer our own phone around the clock.
More help in Tyler
Other mold services in Tyler, TX
Nearby
Mold Remediation in nearby cities
Talk to a certified team now
Need mold remediation in Tyler, TX?
Call our 24/7 line and talk to the certified crew directly. Same-day response, we bill your insurance, and free estimates.